Mounting your phone on the handlebar solves three things at once: you can see the route, the ride recording comes out more accurate, and features like crash detection can work. In exchange you expose the phone to vibration, sun and rain. This post covers what to look for in a mount and how to protect the phone.
In Ridebase GO, crash detection only works with the phone on the handlebar; the details are on the crash detection page.
Types of mount
| Type | How it holds | Suits |
|---|---|---|
| Mechanical lock | The phone twists and locks onto the mount with its own case | Regular and long-distance riders |
| Clamp (four corners) | Sprung or screwed arms grip the phone at its corners | Riders who don't want to change case |
| Pouch | The phone sits in a waterproof pocket with a clear lid | Riders who are often out in the rain |
| Magnetic | A ring on the back of the phone sticks to the mount | Short trips in town |
Mechanical lock systems hold best; the price is buying the case from the same brand. Clamp mounts fit any phone; check that the arms don't press the side buttons. Pouch mounts keep rain off but heat the phone in the sun and add glare. With magnetic mounts, the risk of the phone coming off on a rough road is higher than with the others.
Where does it attach?
- Handlebar tube: The most common place. Measure the diameter; mounts usually come with spacers for a few sizes.
- Mirror stem: Works on scooters and on bikes with covered handlebars.
- Steering stem nut: Used on sport bikes with no handlebar tube.
- Brake or clutch clamp bolts: A permanent, tidy solution that takes a little more work to fit.
Wherever you put it, check two things: it must not hide the instruments, and it must not touch the tank or the screen at full lock.
What does vibration do to the phone?
This is the main issue. Most recent phones have moving parts in the camera to stabilise the image. Apple states on its own support site that long exposure to the vibration produced by high-power motorcycle engines can damage the iPhone camera's stabilisation and focus systems, and recommends a vibration-dampening mount. The same risk applies to other phones with similar camera systems.
The damage usually shows up like this: the camera can't focus, the image shakes, or there is a faint rattle from the camera.
Ways to reduce the risk:
- Use a vibration damper. It is an intermediate piece with rubber bushings that sits between the mount and its base. Most brands sell it separately.
- Don't bolt the phone rigidly to the bar. A metal-to-metal connection passes the vibration straight to the phone.
- Know your engine. Singles and twins vibrate harder, especially at high revs. On small scooters the risk is lower.
- Make an old phone your riding phone. A phone whose camera you wouldn't miss is the safest answer.
Heat, rain and charging
Heat. In summer sun, with the screen on and charging, a phone gets hot; when it gets too hot it dims the screen or shuts down. Pouch mounts speed this up. On a long ride, lowering screen brightness and moving the phone into shade at stops helps.
Rain. Most recent phones are water resistant, but they won't charge while the port is wet. In the rain it is safer to set off with a full battery than to rely on a cable.
Charging. If you've fitted a USB outlet, leave the cable loose enough not to restrict steering and tidy enough not to snag. Wireless charging mounts remove the cable and heat the phone a little more.
Don't touch the phone while riding
The mount is there so you can see the phone, not so you can use it. Set the route and the music before you leave. If something needs changing, stop. Using a handheld phone while riding is illegal in Türkiye and in many other countries; even glancing at a mounted phone takes your eyes off the road.
A short check before you ride
- The mount doesn't rotate on the bar, and the phone doesn't move when you push it by hand.
- Instruments and warning lights are visible.
- The bars turn fully both ways.
- The cable doesn't snag on anything.
- Re-tighten the bolts once after the first ride.
With the phone held solidly on the handlebar, the ride recording is more accurate too. What the recording tells you is in the ride recording post; who finds out in a crash is in the first 60 seconds post.